Mingjiada Supply ADI LT3645 Series Buck Regulator And Low Dropout Linear Regulator
In multi-rail power supply designs for automotive electronics, industrial control and telecommunications equipment, engineers often require a main buck converter to supply digital loads, whilst also configuring a low-noise LDO to provide a clean voltage rail for analogue circuits, sensors or standby circuits. Mingjiada Electronics has long supplied ADI’s (Analog Devices) LT3645—a power management device that integrates a 36V, 500mA step-down regulator with a 200mA low-dropout (LDO) regulator onto a single chip, providing a ‘two-in-one’ solution for space-constrained multi-rail power supply applications.
[ADI/LINEAR] LT3645 – 36V 500mA step-down regulator and 200mA LDO (low-dropout) regulator
The LT3645 is a dual-output regulator that integrates a 500mA step-down regulator and a 200mA low-dropout linear regulator (LDO). A wide input voltage range of 3.6V to 36V makes the LT3645 suitable for regulating power from a variety of sources, including 24V industrial power supplies and automotive batteries. The device’s high operating frequency allows the use of compact and low-cost inductors and capacitors, enabling a very compact solution.
Step-down + LDO in a single chip, simplifying multi-rail power supply architectures
The LT3645 integrates a 500mA step-down switching regulator and a 200mA LDO within a single chip. The step-down channel is suitable as the system’s main voltage rail, providing highly efficient power conversion for loads such as MCUs, logic circuits and communication interfaces; whilst the LDO channel can be used to generate low-ripple, low-noise auxiliary voltage rails to meet the power quality requirements of ADCs, sensor analogue front-ends, PLLs or standby circuits. Compared to a discrete solution comprising a ‘separate buck IC + separate LDO’, the LT3645 reduces the number of external components, minimises PCB footprint and simplifies the complexity of multi-rail timing control.
Key Features of the LT3645:
Wide input range
Operating range from 3.6V to 36V
Overvoltage lockout function protects the circuit against 55V transient voltages on the input
500mA output current switch-mode regulator
High switching frequency: 750kHz
200mA low-dropout linear regulator
1.2V to 16V input; 0.8V to 8V output
310 mV drop across VCC2 to OUT2
Precise, programmable under-voltage lockout
High short-circuit withstand capability
Internal soft-start
<2 μA quiescent current
Small-form-factor, thermally enhanced 16-pin (3 mm × 3 mm) QFN package and 12-pin MSE package
Availability Information
Shenzhen Mingjiada Electronics Co., Ltd. — a long-standing distributor of the ADI/LINEAR product range — maintains a regular stock of LT3645 series step-down regulators and low-dropout regulators, including but not limited to the following:
LT3645EMSE
LT3645EUD
LT3645HMSE
LT3645IMSE
LT3645IUD
Target Applications:
With its integrated combination of “36 V wide input + 500 mA buck + 200 mA LDO”, the LT3645 is suitable for the following applications:
Automotive electronics: Multi-rail power supplies for medium-to-low power applications such as infotainment, body control and instrument clusters, capable of withstanding cold start and load dump transients;
Industrial Control: PLCs, distributed I/O and sensor nodes, where a single chip replaces a combination of discrete buck converters and LDOs;
Telecommunications and Networking Equipment: Providing main and low-noise auxiliary voltages for communication modules, interface circuits and analogue front-ends;
Portable Instruments and Medical Electronics: Reducing power board footprint and simplifying BOM and thermal design.
Mingjiada Electronics supports sample, small-batch and full-reel procurement. For further information on the [ADI] LT3645 series step-down regulators and low-dropout regulators, or to enquire about sample pricing, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further supply details.
コンタクトパーソン: Mr. Sales Manager
電話番号: 86-13410018555
ファックス: 86-0755-83957753