会社ブログについて Mingjiada Supply Microchip MCP3021 22kSPS Single Channel 10-Bit Successive Approximation A/D Converter

Mingjiada Supply Microchip MCP3021 22kSPS Single Channel 10-Bit Successive Approximation A/D Converter

In portable instruments, industrial sensors, battery monitoring and space-constrained embedded systems, analogue-to-digital converters (ADCs) often need to strike a balance between a small package, low power consumption and adequate accuracy. Mingjiada Electronics supplies the Microchip MCP3021—a 22kSPS, 10-bit, single-channel SAR analogue-to-digital converter featuring an I²C interface and a compact SOT-23-6 package, making it suitable for analogue signal acquisition designs where board space and system cost are critical considerations. Mingjiada Electronics offers stock enquiries, sample support, small-batch procurement and BOM fulfilment services.

Product Overview: Compact 10-bit SAR ADC with I²C interface to simplify system design
The MCP3021 is a successive approximation register (SAR) analogue-to-digital converter from Microchip, featuring 10-bit resolution, a maximum sampling rate of 22 kSPS, and a single-channel, single-ended input. The device communicates with the host via an I²C-compatible serial interface, supporting both standard mode (100 kHz) and fast mode (400 kHz), and can be directly connected to an existing I²C bus, thereby reducing GPIO usage and layout complexity.

The MCP3021 operates over a wide supply voltage range, typically spanning 2.7 V to 5.5 V, facilitating direct integration with 3.3 V or 5 V systems. The compact SOT-23-6 package makes it suitable for space-constrained applications such as wearable devices, sensor modules and portable instruments. For designs that do not require high sampling rates but aim to achieve analogue data acquisition with a minimal number of external components, the MCP3021 offers a relatively straightforward solution. Specific electrical parameters, input ranges, accuracy specifications and package options should be referred to in Microchip’s official data sheet.

Key Features and Design Benefits of the MCP3021
1. 10-bit resolution, 22 kSPS sampling rate
The 10-bit resolution meets medium-precision acquisition requirements for general sensor signals, potentiometer positions and battery voltage monitoring; the 22 kSPS sampling rate is suitable for low- to medium-speed analogue signal sampling, such as temperature, pressure, light intensity and power supply voltage monitoring.
2. I²C interface, reducing host resource utilisation
The MCP3021 communicates via the I²C bus, requiring only two signal lines—clock and data—for configuration and data read operations. This makes it suitable for microcontroller systems with limited GPIO resources and facilitates the sharing of the bus amongst multiple devices.
3. Wide supply voltage range
An operating voltage range of 2.7 V to 5.5 V ensures compatibility with mixed 3.3 V and 5 V power supply systems, reducing the complexity of level matching.
4. Compact SOT-23-6 package
The small package helps minimise PCB footprint, making it suitable for sensor nodes, portable devices and modular products. The peripheral circuitry is simple, typically requiring only a few decoupling capacitors to operate.
5. Low Power Consumption and SAR Architecture
The SAR architecture offers low power consumption in low-speed sampling scenarios, making it suitable for battery-powered portable products or those with stringent standby power requirements.

Typical Applications for the MCP3021
Portable instruments and handheld test equipment;
Industrial sensor signal acquisition and transmitters;
Battery voltage and power supply voltage monitoring;
Low-speed analogue signal acquisition, such as temperature, pressure and light intensity;
Wearable devices and small sensor modules;
Detection of potentiometers, push-buttons or analogue inputs in consumer electronics;
Space-constrained embedded data acquisition systems.

For applications where sampling rate requirements are not high, but where compact size, low cost and the convenience of the I²C interface are prioritised, the MCP3021 offers a practical choice as a 10-bit ADC. If the system requires higher resolution or more channels, other models in the same series can be evaluated, with selection based on sampling rate, interface and package.

Mingjiada Electronics is a long-standing supplier of Microchip analogue and mixed-signal devices, offering stock enquiries, sample support, small-batch procurement and bulk supply services for the MCP3021 22kSPS 10-bit SAR analogue-to-digital converter. For further product information on the MCP3021 or to enquire about sample prices, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for more supply details.
Tags: MCP3021A5T-E/OT, MCP3021A5T-E/O, MCP3021A5T-E, MCP3021A5T, MCP3021A5, MCP3021A, MCP3021