会社ブログについて Supply ADI Isolated Interface:Isolated RS-485 & RS-232,Isolated SPI,Isolated USB

Supply ADI Isolated Interface:Isolated RS-485 & RS-232,Isolated SPI,Isolated USB

Shenzhen Mingjiada Electronics Co., Ltd., as a renowned distributor of electronic components, possesses a number of core strengths, including global channels for sourcing genuine products, a stock of over 2 million SKUs, rapid delivery capabilities, and comprehensive technical and supply chain services. We are able to efficiently resolve component procurement challenges during both the research and development and mass production phases.

[Supply Advantages]

Extensive Stock: We maintain a stock of over 2 million SKUs, covering general-purpose, niche, scarce, automotive-grade and industrial-grade components, thereby completely eliminating procurement pain points.

Genuine Product Guarantee: All products are sourced directly from original manufacturers and feature full traceability, ensuring no counterfeit or refurbished items.

Rapid Response and Delivery: Standard orders are dispatched within 1–3 days; domestic express orders are dispatched within 4 hours, with a response time of 24 hours; our dual warehouse system in Hong Kong and Shenzhen ensures efficient logistics operations.

Comprehensive Product Range: We offer full coverage of all electronic components, along with配套 evaluation modules; whilst supporting both small-batch samples and high-volume orders.

Global Supply Chain: Leveraging our dual-warehouse system in Shenzhen and Hong Kong, coupled with an efficient logistics system, we support global distribution to meet the needs of both domestic and international customers.

[Product and Service Advantages]

One-stop procurement solutions: Comprehensive coverage of microcontrollers, memory, power management, sensors, automotive electronics, communications and industrial control sectors, providing system-level BOM procurement and product selection advice.

Technical support: Our engineering team provides end-to-end technical services, covering component selection, alternative solutions, evaluation boards/development kits and debugging support, helping to accelerate R&D cycles.

Two-way supply chain services: In addition to our distribution business, we offer a ‘cash-for-stock’ service for surplus chips and evaluation boards, helping customers clear inventory and recover capital.

Highly competitive pricing: Leveraging a procurement volume of millions of units, our quotations are 5%–15% below the market average, supplemented by tiered pricing and volume discounts.

Leveraging its proprietary iCoupler® magnetic isolation and isoPower® isolated power supply technologies, ADI has developed a comprehensive product portfolio of isolated interfaces, including isolated RS-485, isolated RS-232, isolated SPI and isolated USB, replacing traditional optocoupler solutions. These eliminate ground loops, suppress common-mode interference and provide safe electrical isolation. They are suitable for high-noise, high-safety-requirement applications such as industrial automation, power measurement and control, medical equipment, instrumentation data acquisition, humanoid robots, AI computing infrastructure and in-vehicle testing, whilst offering advantages in integration, stability and EMC performance.

I. Isolated RS-485 and Isolated RS-232

Isolated RS-485 and RS-232 are the most commonly used isolated bus interfaces in industrial field applications. ADI provides single-chip integrated solutions that combine iCoupler isolation channels, bus transceivers and isoPower isolated DC-DC power supplies in a single package, eliminating the need for additional isolation power modules and significantly simplifying peripheral circuitry.

Isolated RS-485 (typical models: ADM2582E, ADM2587E, ADM2682E) complies with the TIA/EIA-485-A standard and supports half-duplex multi-point differential communication. The bus can accommodate up to 256 nodes and features ±15 kV HBM bus ESD protection, as well as open-circuit / short-circuit fault protection, and a fail-safe reception mechanism. The ADM2582E and ADM2587E offer a 2.5 kVrms isolation rating, whilst whilst the ADM2682E and ADM2687E have been upgraded to a 5 kVrms enhanced isolation specification; their creepage distances comply with high-voltage safety standards, and they offer excellent common-mode transient immunity. These devices are suitable for long-distance cabling, communication between inverters and servo peripherals, building automation, and signal acquisition in photovoltaic combiner boxes; they may also be used for long-distance bus communication between humanoid robot joint controllers and host computers.

The isolated RS-232 (typical models ADM3251E and ADM3252E) are fully integrated isolated serial transceivers, supporting two transmit and two receive channels with a maximum data rate of 460 kbps. They also feature an integrated isolated power supply and can operate on a single 3.3 V or 5 V power supply. The RS-232 solution is suitable for traditional instrument debugging ports, industrial control touchscreens and medical equipment debugging links, as it eliminates ground potential differences between the device and the host computer, thereby preventing electrostatic discharge or surges from damaging the main control port.

Compared to discrete solutions, these integrated isolated serial port devices do not require separate digital isolators or external isolated power supplies; they occupy less space on the PCB and emit lower levels of EMI. They can transmit data reliably in industrial environments with multiple nodes and mixed potentials, whilst avoiding data packet loss and bit errors caused by ground loops.

II. Isolated SPI

As the mainstream synchronous high-speed interface for ADCs, DACs, memory, sensors and FPGA peripherals, SPI involves the synchronous transmission of multiple signal lines—including clock, MOSI, MISO and CS—making isolation more challenging than for asynchronous serial interfaces. ADI’s isolated SPI solution, exemplified by the ADuM3150, is a four-channel high-speed digital isolator specifically optimised for the SPI bus. It incorporates a built-in clock delay compensation architecture to resolve timing offset issues caused by isolation, ensuring that the sampling timings of master and slave devices are synchronised.

The ADuM3150 supports SPI clock speeds of up to 40 MHz in delayed clock mode and up to 17 MHz in standard 4-wire mode. It offers low propagation delay with excellent consistency and operates within a temperature range of –40 °C to 125 °C. with high common-mode transient immunity exceeding 25 kV/μs. It is suitable for high-precision data acquisition cards, high-speed ADC sampling chains, LiDAR signal acquisition, and high-speed sensor data exchange between humanoid robot IMUs and the main controller. In addition to dedicated SPI isolation chips, a customised isolated SPI link can be constructed using multi-channel iCoupler isolators combined with an independent isolated power supply, offering flexible adaptation to scenarios involving multiple slave devices or low-speed control.

The isolated SPI solution eliminates the LED ageing issues associated with optocouplers, exhibits minimal timing drift and offers excellent long-term operational stability. It is ideally suited for isolated signal transmission between analogue front-ends and digital controllers in high-precision measurement, aerospace test equipment and automated inspection systems, preventing high-power noise from the analogue side from interfering with digital control circuits and ensuring sampling accuracy.

III. Isolated USB

USB isolation is designed to provide connection isolation between PC hosts and industrial peripherals, medical devices and test instruments, addressing the requirements for ground loops, safety voltage ratings and electrostatic discharge (ESD) protection associated with direct USB bus communication. Typical devices include the ADuM3160, ADuM4160 and LTM2884 μModule isolated USB modules. The ADuM3160 and ADuM4160 provide isolation for USB 2.0 D+/D– differential signal lines, supporting Low-Speed (1.5 Mbps) and Full-Speed (12 Mbps) modes. They automatically detect the bus direction without requiring additional direction control pins, making them the preferred choice for medical diagnostic equipment, portable measuring instruments and industrial debuggers; The LTM2884 is an integrated μModule solution that combines an isolated power supply, LDO voltage regulation and USB isolation, whilst supporting bus-powered operation. Its highly integrated BGA package makes it suitable for high-density circuit boards and portable data acquisition devices.

The core value of isolated USB lies in two key aspects: safety isolation and noise isolation. In medical applications, it meets electrical isolation standards between the patient side and the host PC, preventing the risk of electric shock; in industrial applications, it isolates the computer’s ground from floating-ground industrial equipment, preventing common-mode voltage from damaging the computer’s USB port, whilst also suppressing noise from motors and switching power supplies from entering the host via the USB cable. ADI’s isolated USB solutions are compatible with the USB-IF protocol; they require no modification to host drivers and are plug-and-play. They are commonly used to build isolated USB-to-RS485/RS232 gateways and isolated data logger interfaces, and are widely deployed in laboratory testing and in-vehicle calibration equipment.